home
buy oz wheels online
about oz
details on oz wheels
design & research
quality
view oz range

  QUALITY -
Pre-series and finished products undergo strict controls and constant checks. The final product must comply with the strict specifications of the German TÜV board and customers' individual requirements. A racing driver's victory but also the safety of our car depends on the wheels: for this reason O·Z has made enormous investments into the quality cycle, and this has proved to be one of the determining factors in the success of the Company.
                 
Chemical composition test: raw materials and castings undergo this test to guarantee the correct chemical composition.
Ultrasound and X-ray tests: these tests exclude materials which present defects or impurities which cannot be immediately seen by the naked eye.
Air leakage test (tubeless): the wheels are immersed in a tank of water in which air is injected at 5-7 atmospheres. In this way any air leaks caused by porosity are identified.
Penetrating liquids test: any surface cracks or micro-defects are identified using penetrating liquids, which are highlighted through difference in colour or by ultra-violet rays
Rotational bending test: the wheel is subjected to the same mechanical stress that a car undergoes on a bend, taking the forces in play to the limit.
Biaxial machine test: simulates the behaviour and reactions of the wheel on a dynamic driving route which includes bends, straight stretches, hills and rough surfaces at maximum load. In these conditions the wheel simulates a driving distance of about 300,000 km.
Rolling test: simulates the behaviour and reactions of the wheel on a straight route at maximum load, at a speed of 100km/h.
Impact test: this is the classic test of resistance to impact which the wheels undergo to simulate the stresses caused by strain or impact to which a wheel could be subjected during use on the road.
Size check: this is carried out visually and using instruments to check the dimensions, the circular shape and concentricity of the wheels. Tolerances of a few tenths of a millimetre are allowed when carrying out these tests.
[ home ] [ buy oz wheels online ] [ about oz ] [ details on oz wheels ] [ design and research ] [ quality ] [ view oz range ]